Technical analysis and solution for water heating mattress water pump easy to get stuckIssuing time:2023-04-10 09:00 The water heating mattress pump is easy to get stuck, which may be caused by the following reasons: 1. Water pump bearing wear; 2. The pump impeller is blocked or damaged; 3. Motor coil fault or capacitor problem; 4. The power supply voltage is unstable. To address these issues, we may adopt the following solutions: 1. Regularly clean the pump bearings and impellers, and add lubricating oil to the bearings; 2. Clean up the clogged impeller or replace the damaged impeller; 3. Check whether the motor is faulty, and replace the faulty coil or replace the capacitor; 4. The power supply voltage of the printing room. If the voltage is unstable, you need to use a voltage stabilizer or other voltage stabilization equipment to ensure the voltage stability. It should be noted that when maintaining the water heating mattress pump, the power supply must be cut off first, and all safety measures must be taken to avoid any accidents. If you are unsure how to deal with these problems, please contact a professional technician for repair. DC brushless water pump, water heating mattress water pump, foot bath water pump, dishwasher water pump, intelligent toilet water pump, humidifier water pump, water heater water pump
|